This demonstrates basic LIKE search ```","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",1855885427,De-tangling Metadata before Datasette 1.0, https://github.com/dogsheep/dogsheep-photos/pull/31#issuecomment-1656696679,https://api.github.com/repos/dogsheep/dogsheep-photos/issues/31,1656696679,IC_kwDOD079W85ivy9n,319473,coldclimate,2023-07-29T10:10:29Z,2023-07-29T10:10:29Z,NONE,"+1 to getting this merged down. For future googlers, I installed by... ``` git clone git@github.com:RhetTbull/dogsheep-photos.git cd dogsheep-photos git checkout update_for_bigsur python setup.py install ```","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",771511344,Update for Big Sur, https://github.com/simonw/sqlite-utils/issues/399#issuecomment-1548913065,https://api.github.com/repos/simonw/sqlite-utils/issues/399,1548913065,IC_kwDOCGYnMM5cUomp,433780,chrislkeller,2023-05-16T03:11:03Z,2023-05-16T03:11:52Z,NONE,"Using this thread and some [other resources](https://sqlite-utils.datasette.io/en/stable/cli.html#spatialite-helpers) I managed to cobble together a couple of sqlite-utils lines to add a geometry column for a table that already has a lat/lng column. ``` # add a geometry column sqlite-utils add-geometry-column [db name] [table name] geometry --type POINT --srid 4326 # add a point for each row to geometry column sqlite-utils --load-extension=spatialite [db name] 'update [table name] SET Geometry=MakePoint(longitude, latitude, 4326);' ```","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",1124731464,"Make it easier to insert geometries, with documentation and maybe code", https://github.com/simonw/sqlite-utils/issues/524#issuecomment-1419734229,https://api.github.com/repos/simonw/sqlite-utils/issues/524,1419734229,IC_kwDOCGYnMM5Un2zV,193185,cldellow,2023-02-06T20:53:28Z,2023-02-06T21:16:29Z,NONE,"I think it's not currently possible: sqlite-utils requires that it be one of `integer`, `text`, `float`, `blob` ([see code](https://github.com/simonw/sqlite-utils/blob/fc221f9b62ed8624b1d2098e564f525c84497969/sqlite_utils/cli.py#L2266)) IMO, this is a bit of friction and it would be nice if it was more permissive. SQLite permits developers to use any data type when creating a table. For example, this is a perfectly cromulent sqlite session that creates a table with columns of type `baz` and `bar`: ``` sqlite> create table foo(column1 baz, column2 bar); sqlite> .schema foo CREATE TABLE foo(column1 baz, column2 bar); sqlite> select * from pragma_table_info('foo'); cid name type notnull dflt_value pk ---------- ---------- ---------- ---------- ---------- ---------- 0 column1 baz 0 0 1 column2 bar 0 0 ``` The idea is that the application developer will know what meaning to ascribe to those types. For example, I'm working on a plugin to Datasette. Dates are tricky to handle. If you have some existing rows, you can look at the values in them to know how a user is serializing the dates -- as an ISO 8601 string? An RFC 3339 string? With millisecond precision? With timezone offset? But if you don't yet have any rows, you have to guess. If the column is of type `TEXT`, you don't even know that it's meant to hold a date! In this case, my plugin will look to see if the column is of type `DATE` or `DATETIME`, and assume a certain representation when writing. Perhaps there is an argument that sqlite-utils is trying to conform to SQLite's strict mode, and that is why it limits the choices. In strict mode, SQLite requires that the data type be one of `INT`, `INTEGER`, `REAL`, `TEXT`, `BLOB`, `ANY`. But that can't be the case -- sqlite-utils supports `FLOAT`, which is not one of the valid types in strict mode, and it rejects `INT`, `REAL` and `ANY`, which _are_ valid.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",1572766460,Transformation type `--type DATETIME`, https://github.com/simonw/datasette/issues/1886#issuecomment-1356842576,https://api.github.com/repos/simonw/datasette/issues/1886,1356842576,IC_kwDOBm6k_c5Q38ZQ,18738650,stevecrawshaw,2022-12-18T17:34:20Z,2022-12-18T17:34:20Z,NONE,"A bit late to this, but I have made an app to publish air quality data in Bristol, UK. [air quality data in Bristol, UK.](https://brisaq-wfzqhmj43q-ew.a.run.app/) Next step to see if I can make a streamlit app based on this to produce some nice charts.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",1447050738,"Call for birthday presents: if you're using Datasette, let us know how you're using it here", https://github.com/simonw/sqlite-utils/issues/510#issuecomment-1320394127,https://api.github.com/repos/simonw/sqlite-utils/issues/510,1320394127,IC_kwDOCGYnMM5Os52P,1176293,ar-jan,2022-11-18T18:37:51Z,2022-11-18T18:37:51Z,NONE,"I guess it is not incorrect when it says the version is `4`, though it is confusing. Maybe it doesn't even refer to FTS4/FTS5 versions, but something else? In any case, it's not related to sqlite-utils, but SQLite itself.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",1434911255,Cannot enable FTS5 despite it being available, https://github.com/dogsheep/dogsheep-photos/pull/31#issuecomment-1035717429,https://api.github.com/repos/dogsheep/dogsheep-photos/issues/31,1035717429,IC_kwDOD079W849u8s1,18504,harperreed,2022-02-11T01:55:38Z,2022-02-11T01:55:38Z,NONE,I would love this merged! ,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",771511344,Update for Big Sur, https://github.com/simonw/datasette/issues/236#issuecomment-1033772902,https://api.github.com/repos/simonw/datasette/issues/236,1033772902,IC_kwDOBm6k_c49nh9m,1376648,jordaneremieff,2022-02-09T13:40:52Z,2022-02-09T13:40:52Z,NONE,"Hi @simonw, I've received some inquiries over the last year or so about Datasette and how it might be supported by [Mangum](https://github.com/jordaneremieff/mangum). I maintain Mangum which is, as far as I know, the only project that provides support for ASGI applications in AWS Lambda. If there is anything that I can help with here, please let me know because I think what Datasette provides to the community (even beyond OSS) is noble and worthy of special consideration.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",317001500,datasette publish lambda plugin, https://github.com/simonw/datasette/issues/1304#issuecomment-988463455,https://api.github.com/repos/simonw/datasette/issues/1304,988463455,IC_kwDOBm6k_c466sFf,30934,20after4,2021-12-08T03:23:14Z,2021-12-08T03:23:14Z,NONE,I actually think it would be a useful thing to add support for in datasette. It wouldn't be difficult to unwind an array of params and add the placeholders automatically.,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",863884805,"Document how to send multiple values for ""Named parameters"" ", https://github.com/simonw/datasette/issues/1304#issuecomment-981980048,https://api.github.com/repos/simonw/datasette/issues/1304,981980048,IC_kwDOBm6k_c46h9OQ,30934,20after4,2021-11-29T20:13:53Z,2021-11-29T20:14:11Z,NONE,There isn't any way to do this with sqlite as far as I know. The only option is to insert the right number of ? placeholders into the sql template and then provide an array of values.,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",863884805,"Document how to send multiple values for ""Named parameters"" ", https://github.com/simonw/datasette/issues/1375#issuecomment-860548546,https://api.github.com/repos/simonw/datasette/issues/1375,860548546,MDEyOklzc3VlQ29tbWVudDg2MDU0ODU0Ng==,4068,frafra,2021-06-14T09:41:59Z,2021-06-14T09:41:59Z,NONE,"> There is a feature for this at the moment, but it's a little bit hidden: you can use `?_json=col` to tell > Datasette that you would like a specific column to be exported as nested JSON: https://docs.datasette.io/en/stable/json_api.html#special-json-arguments Thanks :) > I considered trying to make this automatic - so it detects columns that appear to contain valid JSON and outputs them as nested objects - but the problem with that is that it can lead to inconsistent results - you might hit the API and find that not every column contains valid JSON (compared to the previous day) resulting in the API retuning string instead of the expected dictionary and breaking your code. If a developer is not sure if the JSON fields are valid, but then retrieves and parse them, it should handle errors too. Handling inconsistent data is necessary due to the nature of SQLite. A global or dataset option to render the data as they have been defined (JSON, boolean, etc.) when requesting JSON could allow the user to download a regular JSON from the browser without having to rely on APIs. I would guess someone could just make a custom template with an extra JSON-parsed download button otherwise :)","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",919508498,JSON export dumps JSON fields as TEXT, https://github.com/simonw/datasette/issues/1255#issuecomment-812710120,https://api.github.com/repos/simonw/datasette/issues/1255,812710120,MDEyOklzc3VlQ29tbWVudDgxMjcxMDEyMA==,1111743,jungle-boogie,2021-04-02T20:50:08Z,2021-04-02T20:50:08Z,NONE,"Hello again, I was able to get my facets running with this `settings.json`, which was lifted from one of Simon's datasette's and slightly modified. ``` { ""default_page_size"": 100, ""max_returned_rows"": 1000, ""num_sql_threads"": 3, ""sql_time_limit_ms"": 9000, ""default_facet_size"": 10, ""facet_time_limit_ms"": 9000, ""facet_suggest_time_limit_ms"": 500, ""hash_urls"": false, ""allow_facet"": true, ""suggest_facets"": false, ""default_cache_ttl"": 5, ""default_cache_ttl_hashed"": 31536000, ""cache_size_kb"": 0, ""allow_csv_stream"": true, ""max_csv_mb"": 100, ""truncate_cells_html"": 2048, ""template_debug"": false, ""base_url"": ""/"" } ```","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",826700095,Facets timing out but work when filtering, https://github.com/dogsheep/dogsheep-photos/pull/31#issuecomment-811362316,https://api.github.com/repos/dogsheep/dogsheep-photos/issues/31,811362316,MDEyOklzc3VlQ29tbWVudDgxMTM2MjMxNg==,871250,PabloLerma,2021-03-31T19:14:39Z,2021-03-31T19:14:39Z,NONE,👋 could I help somehow for this to be merged? As Big Sur is going to be more used as the time goes I think it would be nice to merge and publish a new version. Nice work!,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",771511344,Update for Big Sur, https://github.com/simonw/sqlite-utils/issues/159#issuecomment-802032152,https://api.github.com/repos/simonw/sqlite-utils/issues/159,802032152,MDEyOklzc3VlQ29tbWVudDgwMjAzMjE1Mg==,1025224,limar,2021-03-18T15:42:52Z,2021-03-18T15:42:52Z,NONE,"I confirm the bug. Happens for me in version 3.6. I use the call to delete all the records: `table.delete_where()` This does not delete anything. I see that `delete()` method DOES use context manager `with self.db.conn:` which should help. You may want to align the code of both methods.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",702386948,.delete_where() does not auto-commit (unlike .insert() or .upsert()), https://github.com/simonw/datasette/issues/1238#issuecomment-790857004,https://api.github.com/repos/simonw/datasette/issues/1238,790857004,MDEyOklzc3VlQ29tbWVudDc5MDg1NzAwNA==,79913,tsibley,2021-03-04T19:06:55Z,2021-03-04T19:06:55Z,NONE,"@rgieseke Ah, that's super helpful. Thank you for the workaround for now!","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",813899472,Custom pages don't work with base_url setting, https://github.com/dogsheep/google-takeout-to-sqlite/pull/5#issuecomment-790389335,https://api.github.com/repos/dogsheep/google-takeout-to-sqlite/issues/5,790389335,MDEyOklzc3VlQ29tbWVudDc5MDM4OTMzNQ==,306240,UtahDave,2021-03-04T07:32:04Z,2021-03-04T07:32:04Z,NONE,"> The command takes quite a while to start running, presumably because this line causes it to have to scan the WHOLE file in order to generate a count: > > https://github.com/dogsheep/google-takeout-to-sqlite/blob/a3de045eba0fae4b309da21aa3119102b0efc576/google_takeout_to_sqlite/utils.py#L66-L67 > > I'm fine with waiting though. It's not like this is a command people run every day - and without that count we can't show a progress bar, which seems pretty important for a process that takes this long. The wait is from python loading the mbox file. This happens regardless if you're getting the length of the mbox. The mbox module is on the slow side. It is possible to do one's own parsing of the mbox, but I kind of wanted to avoid doing that.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",813880401,WIP: Add Gmail takeout mbox import, https://github.com/dogsheep/google-takeout-to-sqlite/issues/4#issuecomment-790198930,https://api.github.com/repos/dogsheep/google-takeout-to-sqlite/issues/4,790198930,MDEyOklzc3VlQ29tbWVudDc5MDE5ODkzMA==,203343,Btibert3,2021-03-04T00:58:40Z,2021-03-04T00:58:40Z,NONE,"I am just seeing this sorry, yes! I will kick the tires later on tonight. My apologies for the delay.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",778380836,Feature Request: Gmail, https://github.com/simonw/datasette/issues/1220#issuecomment-778467759,https://api.github.com/repos/simonw/datasette/issues/1220,778467759,MDEyOklzc3VlQ29tbWVudDc3ODQ2Nzc1OQ==,30607,aborruso,2021-02-12T21:35:17Z,2021-02-12T21:35:17Z,NONE,Thank you,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",806743116,Installing datasette via docker: Path 'fixtures.db' does not exist, https://github.com/simonw/datasette/issues/1217#issuecomment-774385092,https://api.github.com/repos/simonw/datasette/issues/1217,774385092,MDEyOklzc3VlQ29tbWVudDc3NDM4NTA5Mg==,6165713,plpxsk,2021-02-06T02:49:11Z,2021-02-06T02:49:11Z,NONE,"A good reference seems to be the note to run `datasette` as a module in https://github.com/simonw/datasette/pull/556 ","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",802513359,Possible to deploy as a python app (for Rstudio connect server)?, https://github.com/simonw/sqlite-utils/issues/220#issuecomment-761015218,https://api.github.com/repos/simonw/sqlite-utils/issues/220,761015218,MDEyOklzc3VlQ29tbWVudDc2MTAxNTIxOA==,649467,mhalle,2021-01-15T15:40:08Z,2021-01-15T15:40:08Z,NONE,"Make sense. If you're coming from the sqlite3 side of things, rather than the datasette side, wanting the fts methods to work for views makes more sense. sqlite3 allows fts5 tables on views, so I was looking for CLI functionality to build the fts virtual tables. Ultimately, though, sharing fts virtual tables across tables and derivative views is likely more efficient. Maybe an explicit error message like, ""fts is not supported for views"" rather than just throwing an exception that the method doesn't exist"" might be helpful. Not critical though. Thanks.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",783778672,Better error message for *_fts methods against views, https://github.com/simonw/datasette/issues/1142#issuecomment-744522099,https://api.github.com/repos/simonw/datasette/issues/1142,744522099,MDEyOklzc3VlQ29tbWVudDc0NDUyMjA5OQ==,6622733,nitinpaultifr,2020-12-14T15:37:47Z,2020-12-14T15:37:47Z,NONE,"Alright I could give it a try! This might be a stupid question, can you tell me how to run the server from my fork? So that I can test the changes?","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",763361458,"""Stream all rows"" is not at all obvious", https://github.com/simonw/datasette/issues/1144#issuecomment-744489028,https://api.github.com/repos/simonw/datasette/issues/1144,744489028,MDEyOklzc3VlQ29tbWVudDc0NDQ4OTAyOA==,475613,MarkusH,2020-12-14T14:47:11Z,2020-12-14T14:47:11Z,NONE,"Thanks for opening the issue, @simonw. Let me elaborate on my Tweets. [datasette-chartjs](https://github.com/MarkusH/datasette-chartjs) provides drop down lists to pick the chart visualization (e.g. bar, line, doughnut, pie, ...) as well as the column used for the ""x axis"" (e.g. time). A user can change the values on-demand. The chart will be redrawn w/o querying the database again. However, if a user wants to change the underlying query, they will use the SQL field provided by datasette or any of the other datasette built-in features to amend a query. In order to maintain a user's selections for the plugin, datasette-chartjs copies some parts of [datasette-vega](https://github.com/simonw/datasette-vega) which persist the chosen visualization and column in the hash part of a URL (the stuff behind the `#`). The plugin load the config from the hash upon initialization on the next page and use it accordingly. Additionally, datasette-vega and datasette-chartjs need to make sure to include the hash in all links and forms that cause a reload of the page. This is, such that the config persists between clicks. This ticket is about moving thes parts into datasette that provide the functionality to do so. This includes: 1. a way to load config options with a given prefix from the current URL hash 1. a way to update the current URL hash with a new config value or a bunch of config options 1. updating all necessary links and forms on the current page to include the URL hash whenever its updated 1. to prevent leaking config options to external pages, only ""internal"" links should be updated There's another, optional, feature that we might want to think about during the design phase: the scope of the config. Links within a datasette instance have 1 of 3 scopes: 1. global, for the whole datasette project 1. database, for all tables in a database 1. table, only for a table within a database When updating the links and forms as pointed out in 3. above, it might be worth considering which links need to be updated. I could imagine a plugin that wants to persist some setting across all tables within a database but another setting only within a table.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",765637324,JavaScript to help plugins interact with the fragment part of the URL, https://github.com/simonw/datasette/issues/276#issuecomment-744461856,https://api.github.com/repos/simonw/datasette/issues/276,744461856,MDEyOklzc3VlQ29tbWVudDc0NDQ2MTg1Ng==,296686,robintw,2020-12-14T14:04:57Z,2020-12-14T14:04:57Z,NONE,"I'm looking into using datasette with a database with spatialite geometry columns, and came across this issue. Has there been any progress on this since 2018? In one of my tables I'm just storing lat/lon points in a spatialite point geometry, and I've managed to make datasette-cluster-map display the points by extracting the lat and lon in SQL - using something like `select ... ST_X(location) as longitude, ST_Y(location) as latitude from Blah`. Something more 'built-in' would be great though - particularly for the tables I have that store more complex geometries.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",324835838,Handle spatialite geometry columns better, https://github.com/simonw/datasette/issues/1142#issuecomment-743998792,https://api.github.com/repos/simonw/datasette/issues/1142,743998792,MDEyOklzc3VlQ29tbWVudDc0Mzk5ODc5Mg==,6622733,nitinpaultifr,2020-12-13T12:14:06Z,2020-12-13T12:14:06Z,NONE,"Agreed, it would definitely provide better controls. However, I do feel it makes for a bit of inconsistent UX for the 'Advanced export' section, with links to download for JSON, checkboxes and radio buttons + button to download for CSV. Do you think this example makes the UX a bit nicer/consistent?  I could give it a try if you'd like but I've never contributed to an actual project! ","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",763361458,"""Stream all rows"" is not at all obvious", https://github.com/simonw/datasette/issues/766#issuecomment-741665253,https://api.github.com/repos/simonw/datasette/issues/766,741665253,MDEyOklzc3VlQ29tbWVudDc0MTY2NTI1Mw==,2181410,clausjuhl,2020-12-09T09:59:05Z,2020-12-09T09:59:05Z,NONE,Hi Simon. Any news on using wildcard-searches with datasette? Thanks!,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",617323873,Enable wildcard-searches by default, https://github.com/simonw/datasette/issues/782#issuecomment-712569695,https://api.github.com/repos/simonw/datasette/issues/782,712569695,MDEyOklzc3VlQ29tbWVudDcxMjU2OTY5NQ==,222245,carlmjohnson,2020-10-20T03:45:48Z,2020-10-20T03:46:14Z,NONE,"I vote against headers. It has a lot of strikes against it: poor discoverability, new developers often don’t know how to use them, makes CORS harder, makes it hard to use eg with JQ, needs ad hoc specification for each bit of metadata, etc. The only advantage of headers is that you don’t need to do .rows, but that’s actually good as a data validation step anyway—if .rows is missing assume there’s an error and do your error handling path instead of parsing the rest.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",627794879,Redesign default .json format, https://github.com/simonw/datasette/issues/619#issuecomment-697973420,https://api.github.com/repos/simonw/datasette/issues/619,697973420,MDEyOklzc3VlQ29tbWVudDY5Nzk3MzQyMA==,45416,obra,2020-09-23T21:07:58Z,2020-09-23T21:07:58Z,NONE,"I've just run into this after crafting a complex query and discovered that hitting back loses my query. Even showing me the whole bad query would be a huge improvement over the current status quo.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",520655983,"""Invalid SQL"" page should let you edit the SQL", https://github.com/dogsheep/twitter-to-sqlite/issues/50#issuecomment-691501132,https://api.github.com/repos/dogsheep/twitter-to-sqlite/issues/50,691501132,MDEyOklzc3VlQ29tbWVudDY5MTUwMTEzMg==,706257,bcongdon,2020-09-12T14:48:10Z,2020-09-12T14:48:10Z,NONE,"This seems to be an issue even with larger values of `--stop_after`: ``` $ twitter-to-sqlite favorites twitter.db --stop_after=2000 Importing favorites [####################################] 198 $ ```","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",698791218,"favorites --stop_after=N stops after min(N, 200)", https://github.com/dogsheep/github-to-sqlite/issues/33#issuecomment-622279374,https://api.github.com/repos/dogsheep/github-to-sqlite/issues/33,622279374,MDEyOklzc3VlQ29tbWVudDYyMjI3OTM3NA==,2029,garethr,2020-05-01T07:12:47Z,2020-05-01T07:12:47Z,NONE,"I also go it working with: ```yaml run: echo ${{ secrets.github_token }} | github-to-sqlite auth ```","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",609950090,Fall back to authentication via ENV, https://github.com/simonw/datasette/issues/176#issuecomment-617208503,https://api.github.com/repos/simonw/datasette/issues/176,617208503,MDEyOklzc3VlQ29tbWVudDYxNzIwODUwMw==,12976,nkirsch,2020-04-21T14:16:24Z,2020-04-21T14:16:24Z,NONE,"@eads I'm interested in helping, if there's still a need...","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",285168503,Add GraphQL endpoint, https://github.com/simonw/datasette/issues/662#issuecomment-579864036,https://api.github.com/repos/simonw/datasette/issues/662,579864036,MDEyOklzc3VlQ29tbWVudDU3OTg2NDAzNg==,2181410,clausjuhl,2020-01-29T17:17:01Z,2020-01-29T17:17:01Z,NONE,This is excellent news. I'll wait until version 0.34. It would be tiresome to rewrite all standard-queries into custom queries. Thank you!,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",556814876,Escape_fts5_query-hookimplementation does not work with queries to standard tables, https://github.com/simonw/datasette/issues/662#issuecomment-579798917,https://api.github.com/repos/simonw/datasette/issues/662,579798917,MDEyOklzc3VlQ29tbWVudDU3OTc5ODkxNw==,2181410,clausjuhl,2020-01-29T15:08:57Z,2020-01-29T15:08:57Z,NONE,"Hi Simon Thankt you for a quick reply. Here are a few examples of urls, where I search the 'cases_fts'-virtual table for tokens in the title-column. It returns the same results, wether the other query-params are present or not. Searching for sky http://localhost:8001/db-7596a4e/cases?_search_title=sky&year__gte=1997&year__lte=2017&_sort_desc=last_deliberation_date Returns searchresults Searching for sky* http://localhost:8001/db-7596a4e/cases?_search_title=sky*&year__gte=1997&year__lte=2017&_sort_desc=last_deliberation_date Returns searchresults Searching for sky-tog http://localhost:8001/db-7596a4e/cases?_search_title=sky-tog&year__gte=1997&year__lte=2017&_sort_desc=last_deliberation_date Throws: No such column: tog searching for sky+ http://localhost:8001/db-7596a4e/cases?_search_title=sky%2B&year__gte=1997&year__lte=2017&_sort_desc=last_deliberation_date Throws: Invalid SQL: fts5: syntax error near """" Searching for ""madpakke"" (including double quotes) http://localhost:8001/db-7596a4e/cases?_search_title=%22madpakke%22&year__gte=1997&year__lte=2017&_sort_desc=last_deliberation_date Returns searchresults even though 'madpakke' only appears in the fulltextindex without quotes As I said, my other plugins work just fine, and I just copied your sql_functions.py from the datasette-repo. Thanks!","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",556814876,Escape_fts5_query-hookimplementation does not work with queries to standard tables, https://github.com/simonw/datasette/issues/514#issuecomment-509154312,https://api.github.com/repos/simonw/datasette/issues/514,509154312,MDEyOklzc3VlQ29tbWVudDUwOTE1NDMxMg==,4363711,JesperTreetop,2019-07-08T09:36:25Z,2019-07-08T09:40:33Z,NONE,"@chrismp: Ports 1024 and under are privileged and can usually only be bound by a root or supervisor user, so it makes sense if you're running as the user `chris` that port 8000 works but 80 doesn't. See [this generic question-and-answer](https://superuser.com/questions/710253/allow-non-root-process-to-bind-to-port-80-and-443) and [this systemd question-and-answer](https://stackoverflow.com/questions/40865775/linux-systemd-service-on-port-80) for more information about ways to skin this cat. Without knowing your specific circumstances, either extending those privileges to that service/executable/user, proxying them through something like nginx or indeed looking at what the nginx systemd job has to do to listen at port 80 all sound like good ways to start. At this point, this is more generic systemd/Linux support than a Datasette issue, which is why a complete rando like me is able to contribute anything. ","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",459397625,Documentation with recommendations on running Datasette in production without using Docker, https://github.com/simonw/datasette/issues/120#issuecomment-439421164,https://api.github.com/repos/simonw/datasette/issues/120,439421164,MDEyOklzc3VlQ29tbWVudDQzOTQyMTE2NA==,36796532,ad-si,2018-11-16T15:05:18Z,2018-11-16T15:05:18Z,NONE,This would be an awesome feature ❤️ ,"{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",275087397,Plugin that adds an authentication layer of some sort, https://github.com/simonw/datasette/issues/176#issuecomment-431867885,https://api.github.com/repos/simonw/datasette/issues/176,431867885,MDEyOklzc3VlQ29tbWVudDQzMTg2Nzg4NQ==,634572,eads,2018-10-22T15:24:57Z,2018-10-22T15:24:57Z,NONE,"I'd like this as well. It would let me access Datasette-driven projects from GatsbyJS the same way I can access Postgres DBs via Hasura. While I don't see SQLite replacing Postgres for the 50m row datasets I sometimes have to work with, there's a whole class of smaller datasets that are great with Datasette but currently would find another option.","{""total_count"": 1, ""+1"": 1, ""-1"": 0, ""laugh"": 0, ""hooray"": 0, ""confused"": 0, ""heart"": 0, ""rocket"": 0, ""eyes"": 0}",285168503,Add GraphQL endpoint,